How to use the Froehde reagent

Questions?

• What is Froehde reagent test for?

  Froehde Reagent Test is one of reagents for identifying benzofurans, MDMA, MDA, mescaline, mephedrone or opioids, but it is also suitable for meth/amphetamine, tryptamines, phenethylamines and more. It is used to rule out different, less predictable, less desirable, highly toxic dangerous drugs. Multiple reagents are required to detect adulterants and increase analysis precision.

  Reagent tests can indicate PRESENCE, but not QUANTITY. Mixtures can be detected with reagents only if adulterant causes a darker color change than the expected substance. To detect all ingredients and estimate their amount pair reagents with a TLC purity test kit.

• What is included in Froehde reagent test kit?

  Froehde Reagent Test Kit includes Froehde reagent, absorbent vermiculite, a porcelain reaction plate, a spatula, gloves, instructions and app for all test kits and over 800 substances. Bottle contains 10 ml (crystals), 100 tests in total. High quality HDPE and brown amber glass protect reagents from light, plastic and moisture to ensure prolonged shelf life. Child-proof caps guarantee 0 spills.

• What is each reagent test for?

  Froehde Reagent Test is best to positively identify benzofurans, MDMA, MDA, mescaline, mephedrone or opioids, but it is also suitable for meth/amphetamine, tryptamines, phenethylamines and more.

   

  

  • Cannabis (4-AP) – main test for THC / CBD, helps rule out synthetic cannabinoids
  • Ehrlich – main test for all indoles, e.g. lysergamides and tryptamines but also 5-HTP and more, secondary test for cocaine
  • Hofmann – main test for lysergamides and tryptamines, more precise but slower than Ehrlich
  • Froehde – main test for most powders, secondary test for ketamine and amphetamines, long shelf life
  • Liebermann – main test for most powders, secondary test for cocaine (detects levamisole)
  • Marquis – main test for most powders, secondary test for ketamine, mephedrone and psychedelics
  • Mecke – main test for most powders, secondary test for cocaine, ketamine and mephedrone
  • Morris – main test for cathinones, cocaine and ketamine, can tell apart some novel dissociatives
  • Robadope – main test for primary amines, e.g. MDA, amphetamine or PMA
  • Simon – main test for secondary amines, e.g. MDMA, meth, mephedrone, methylone or PMMA
  • Zimmermann / Beam – main test for cathinones and benzodiazepines in geneal, detects also CBD

  Fentanyl Test Strip to detect fentanyl, even if it is mixed in another substance.

  Reagents can indicate PRESENCE, but not QUANTITY. Adulterants can be detected with reagents only if they cause a darker color change than the expected substance. To detect all ingredients and estimate their amount pair reagents with a TLC purity test kit.

• How to use Froehde reagent test kit?

  GET ALL TOOLS

  First, prepare a clean white testing surface – ceramic or glass is the best, e.g. bottom of a mug or a plate. Get your sample, reagents, a sharp tool / scoop and paper towels.

  PREPARE SAMPLE, ABOUT THIS BIG -> ●   

  If testing a pill, powder or crystal, crush it finely. If testing a blotter or gel tab cut off 1/8th (a corner).  If testing a liquid, dry one drop on paper or clean ceramic surface. A bigger sample can cause a stronger reaction. You need a new sample for each test.

  ADD ONE* DROP (OR PILE) OF REAGENT

  Shake bottles hard before use, then tap firmly to shake down any reagent stuck in cap. Do not let a bottle touch sample or you will ruin the rest of the reagent. Use just enough reagent to cover a sample. If using crystals avoid air pockets by flattening crystals onto sample using a clean tool. *Do not combine reagents except for „A” and „B” bottles.

  OBSERVE FOR UP TO 3 MINUTES

  Disregard any color change after 3 minutes. Do not overinterpret your results, consider that color change reaction is always fastest and most vivid in the part where biggest surface of reagent touches sample, compared to its edges. Over time reaction will degrade due to air contact. Take photos.

  COMPARE RESULTS

  Compare color change with instructions. Reagents can indicate PRESENCE, but not QUANTITY. Adulterants can be detected with reagents only if they cause a darker color change than the expected substance. To detect all ingredients and estimate their amount pair reagents with a TLC purity test kit.

  Clean used reagent tools / testing surface with lots of running water and detergent, avoid contamination.

• How to interpret Froehde reagent test results?

  Expected Froehde reagent test results:

  • 2C-B – yellow > green
  • Cocaine – no color change
  • DMT – no color change
  • Heroin – purple
  • Ketamine – no color change
  • LSD – no instant vivid reaction
  • Meth/Amphetamine – no color change
  • MDMA/MDA – instant black
  • MMC – no color change

  

  CLICK BELOW TO VIEW PRO TEST REAGENT TESTING BOOKLET IN FULL RESOLUTION

  

  CHECK ALL FROEHDE  TEST REACTIONS IN RESULTS APP AT PROTESTKIT.EU/RESULTS

• How to handle Froehde test kit?

  Drug testing kits contain toxic and/or corrosive chemicals, strong enough to burn skin and clothing. Keep out of eyes and mouth. Keep away from children and animals. Always use in a well-ventilated area. Wear gloves (supplied) when handling the bottle and cap. Wear protective eyewear. Never point towards face etc. If you get some on you/clothing, then immediately wash with lots of soap and water. Dispose of any unwanted reagent with running water, ventilate. Store reagents standing up and away from heat in a cool, dark place. The average shelf life of 2 years can be significantly extended by storing in a fridge or freezer (warm up to room temperature before use).

  Reagents deteriorate with time or due to contact with air, especially if exposed to sunlight or not refrigerated. If you are uncertain whether the reagent will work, test it with an already confirmed sample.

• How to check purity (number and amount of substances)?

  After an Identification Test we recommend a TLC purity test. It shows how many substances are in the sample and estimates the amount (%) of each one separately.

  A Quantity Test measures the one substance you expect, and reagents name what TLC separated, so the three work together.

• More questions?

  Click here to see our main FAQ on the home page.